LBH/MBH/EH BEAM AND GLULAM HANGERS

Designed to support heavy timber and glulam beams.
MATERIAL: 3 ga.
FINISH: Prime Paint
FASTENERS: Bolts

1. Factored Resistance for Uplift has been increased by 15 % for short-term load duration (wind, earthquake).
2. Verify that dimensions of wood members are adequate to transfer tabulated factored loads.
3. All fasteners must be installed to obtain tabulated factored resistance.
4. The hanger may be attached to steel header by 3/16" x 21/2" fillet welds at each end of the header angle to obtain the tabulated resistance. Uplift Factored Resistance does not apply to this weld-on application.
5. Factored Resistance for bolts is based on supporting member (header) thickness of minimum 3".
6. MBH are available in special sizes.